How to Install your LEDs

LED Installation Videos

Installation Video for LED Headlights

Installing LEDs on your car or truck is typically very easy. We'll walk you through an installation on a 2017 Jeep Wrangler Unlimited JK Sahara. NOTE: Wranglers and Gladiators MUST aim the headlights for proper beam pattern, see second video.

How to adjust your Supernova V.4s for the best beam pattern

This video will show you how to adjust the Supernova V.4 X LED Headlight bulbs to achieve a great beam pattern, better lighting, and a wider field of view.  Wrangler and Gladiator owners, watch this video to adjust beam pattern.

 

 

General LEDs Installation

1. Gain access to the bulb.  This may involve removing a clear cover, peeling back interior lining, or opening your hood.

2. Remove the stock bulb.

3. Plug in the LED into the socket.

4. Test the LED by turning on the light.

5. If the LED doesn't light up, don't fret.  Just unplug it, turn it around, and reinstall it.  LEDs require a specific polarity to work.

6. Place the bulb back into the socket.

7. Enjoy!

 

LED Panels

LED panels have two parts: the LED panel with double sided tape, and a bulb base connector.

1. Gain access to the bulb.  This may involve removing a clear cover, peeling back interior lining, or opening your hood.

2. Remove the stock bulb.

3. Plug in the LED panel to the bulb base connector.

4. Plug in the LED to the socket.

4. Test the LED by turning on the light.

5. If the LED doesn't light up, don't fret.  Just unplug it, turn it around, and reinstall it.  LEDs require a specific polarity to work.

6. Place the bulb back into the socket.

7. Enjoy!

Turn Signals and Hyperblink

When changing your Turn Signals to LEDs, you will need a hyperblink fix in order to make the LEDs flash at the normal speed.

Click here to buy hyperblink fixes.